Yaesu Ft-65 Manual |verified| -
Transmits on 144–148 MHz and 430–450 MHz; receives from 136–174 MHz and 400–480 MHz, plus the FM broadcast band (65–108 MHz). Power Levels: Selectable at 5W, 2.5W, or 0.5W.
This guide is a supplementary educational resource. Always refer to the official Yaesu FT-65 manual provided by Vertex Standard for safety warnings and regulatory compliance. Specifications are subject to change without notice. yaesu ft-65 manual
key to toggle between frequency (VFO) and saved memory channels. DX Engineering 2. Basic Frequency & Tone Setup Manual Tuning Transmits on 144–148 MHz and 430–450 MHz; receives
: Details specialized features like ARTS™ (Automatic Range Transponder System), VOX, DTMF autodialer, and password protection. Always refer to the official Yaesu FT-65 manual
| Menu # | Function | What it does | Recommended Setting | | :--- | :--- | :--- | :--- | | | APO (Auto Power Off) | Turns radio off after set time of inactivity | 30 min (saves battery) | | 05 | BEEP | Keypad confirmation tone | ON (helps with blind programming) | | 10 | DCS.COD | Digital Coded Squelch code | Set to match your repeater | | 11 | DCS.N/R | Invert DCS polarity | Usually "n" (Normal) | | 13 | DW (Dual Watch) | Monitors two frequencies for activity | OFF unless needed | | 26 | LOCK | Locks keypad (Mode selection) | Select "KEY" to lock PTT only | | 29 | MEM.CH | Channel number selection | Use this to jump to channel 100 | | 30 | MUT.EXT | External muting via accessory jack | OFF | | 34 | PWR.SEL | Transmit power level | "HIGH" (5W) or "LOW" (0.5W) | | 38 | RESET | Factory reset (three methods exist) | Use with caution | | 42 | SQL.LEV | Squelch threshold (0-15) | 2 or 3 (prevents open noise) | | 43 | STEP | Frequency tuning step (5/6.25/10/12.5/15/20/25/50/100 kHz) | 12.5 kHz (for US) or 5 kHz (for HF) | | 44 | TN.FRQ | CTCSS Tone Frequency (67.0–254.1 Hz) | Set to your repeater’s input tone |
Navigating the radio requires a mix of direct keypad entry and "Set Mode" menu adjustments.