Before you close this article, ensure you have:
If you are looking to update satellite lists or firmware, these are the most reliable methods: Satlink Ws 6923 Software Download
A small utility used to edit the pre-installed satellite list and transponder frequencies on your PC. Before you close this article, ensure you have:
| Error Message / Symptom | Likely Cause | Solution | | :--- | :--- | :--- | | | CH340 driver missing or Windows blocked it. | Boot Windows into "Disable Driver Signature Enforcement" mode. Reinstall driver. | | ISP Tool says "Sync failed" | Wrong RX/TX wiring or meter not in boot mode. | Swap the TX/RX wires. Try holding the "Volume Down" or "OK" button during power-on instead of Power. | | Firmware upload stops at 50% | Baud rate too high. | Lower baud rate to 57600 or 38400. | | Device boots but shows "File Error" | Corrupted firmware file or wrong model variant. | Redownload the file. Ensure you have the WS-6923 firmware, not the WS-6906 or WS-6933. | | Blind scan still finds nothing | Satellite database not updated. | After flashing, manually add a known active TP (Transponder) via the "TP Edit" menu. | Reinstall driver