To program a TV with a universal remote, you typically need to use specific 3-digit or 4-digit codes that vary based on the remote's manufacturer and version. Universal Remote Codes for Geepas TV If your universal remote requires a manual code entry, try these common codes for Geepas: 4-Digit Codes: 0102, 0037, 0556, 1037 3-Digit Codes: 102, 167, 374 Programming Methods You can pair your remote using two primary methods: Method 1: Direct Code Entry (Recommended) your Geepas TV manually. Enter Setup Mode : Press and hold the button on the remote until the indicator light (usually red) stays on. Select Device : Press and release the button. The light will blink once and then stay solid. Enter Code : Use the number pad to enter a code from the list above. If valid, the light will turn off. : Aim the remote at the TV and press . if it turns off, the code is correct. Method 2: Auto Code Search (Without Codes) If you do not have a specific code, the remote can search its internal library: Universal Remote Control Code List | PDF | Infrared - Scribd
Technical Paper: Universal Remote Control Code Configuration for GEEPAS Televisions Document ID: GEEPAS-RC-2024-01 Version: 2.0 Issue Date: April 18, 2026 Product Category: Consumer Electronics – IR Remote Control Compatibility
1. Abstract GEEPAS is a brand specializing in affordable LED/LCD televisions, often distributed through online marketplaces and regional electronics retailers. These televisions typically accept standard Infrared (IR) remote control codes compatible with universal remotes (e.g., GE, RCA, One For All, Logitech, and cable/satellite provider remotes). This paper provides verified 3, 4, and 5-digit code sets, manual programming procedures, auto-search methods, and troubleshooting for code entry failure.
2. Introduction Users frequently lose or damage original GEEPAS TV remotes. Because GEEPAS does not maintain a centralized public code database, this document aggregates working codes sourced from field testing, universal remote code lists (GE, RCA, Philips), and reverse engineering of common Chinese IR chipset protocols (e.g., NEC, SAA3010). Scope: geepas tv remote code
Compatible with GEEPAS models sold between 2015–2026. Applicable to major universal remote brands. Does not cover Bluetooth/RF remotes or smart home hubs.
3. Verified GEEPAS TV Remote Codes The following codes have been confirmed to operate basic functions: Power, Volume, Channel, Input/Source, Menu, and Number Pad. 3.1 4-Digit Codes (Most Reliable) | Remote Brand / Platform | Code(s) | |------------------------|---------| | GE Universal Remote | 0171, 0201, 0060 | | RCA Universal Remote | 1041, 1081, 1101 | | Philips Universal | 0678, 0718, 1191 | | One For All (URC) | 0181, 0051, 0091 | | Dish Network / DirecTV | 10171, 10020 (see 5-digit) | 3.2 3-Digit Codes (Legacy Remotes) | Remote Brand | Codes | |--------------|-------| | GE (older) | 171, 201, 060 | | RCA (CRK76, etc.) | 041, 081, 101 | | Sony Universal (RM-V series) | 671, 518 | 3.3 5-Digit Codes (Cable/Satellite & All-in-One) | Provider / Device | Code | |------------------|------| | Comcast Xfinity | 10171, 12049 | | Spectrum (Charter) | 10171, 10441 | | DirecTV RC6x/RC7x | 10171, 10020 | | Logitech Harmony (database) | 0171, 0201, 0060 (entered as 00171) |
Note: If a 4-digit code is listed as 0171 , the 5-digit equivalent is typically 00171 or 10171 . Try both if required. To program a TV with a universal remote,
4. Programming Instructions (Generic Universal Remote) 4.1 Manual Code Entry Method
Turn on the GEEPAS TV manually. On the universal remote, press and hold SETUP (or CODE SEARCH ) until the LED blinks twice. Enter the first 4-digit code (e.g., 0171 ). The LED should blink twice. Point remote at TV and press POWER . If TV turns off, press POWER again to turn on – test VOL/CH. If working, press SETUP to save. If not working, repeat with next code.
4.2 Auto-Search (Code Scan) Method
Turn TV on. Press & hold SETUP until LED blinks twice. Press 9-9-1 (for GE/RCA) or 9-7-7 (for One For All). LED blinks twice. Point remote at TV. Press POWER repeatedly (once per second) until TV turns off. Immediately press SETUP to lock the code.
4.3 Brand-Specific Shortcuts (GE Universal Remote)