Place the machine on a level concrete floor. Use the adjustable leveling feet. The manual stresses that an unlevel magazine causes "mis-picks" (the vacuum cup grabs two blanks instead of one).
: The Combi YouTube channel provides visual guides for "No-Tool" changeover sequences and machine operation. combi 2ez case erector manual
The bottom plows are spring-loaded. Look for the scale on the side of the rail. Place the machine on a level concrete floor
Here is a step-by-step breakdown of the setup process typically outlined in the manual: : The Combi YouTube channel provides visual guides
| Frequency | Task | Manual Reference Page | | :--- | :--- | :--- | | | Check air filter water bowl; drain if full. | Section 6.2 | | Weekly | Wipe vacuum cups with alcohol to remove paper dust. | Section 6.4 | | Monthly | Lubricate all pivot points (white lithium grease). Tighten chain tension on the ram. | Section 6.7 | | Quarterly | Replace worn vacuum cups (cracks cause pressure loss). Check timing belt for fraying. | Section 7 (Parts List) |
The 2-EZ uses a combination of vacuum suction and pneumatic actuators to automate box forming.