Dell Mih61r Mb Front Panel Pinout ((exclusive)) <VERIFIED ✯>

There isn't one. Dell does not route a reset button to the front panel header on the MH61R. If you want a reset button, you must short two specific pins on the super I/O chip—which is not recommended for beginners.

On the Dell MH61R, the power switch circuit is on and Pin 7 (GND) . Dell Mih61r Mb Front Panel Pinout

| Pin | Signal Name | Purpose | Wire Color (Standard) | | :--- | :--- | :--- | :--- | | 1 | HDD_LED+ (HDD+ ) | Hard Disk Drive Activity LED Positive | Red or Orange | | 2 | HDD_LED- (HDD- ) | Hard Disk Drive Activity LED Negative | White or Black | | 3 | PWR_LED+ (PLED+) | Power LED Positive | Green or Blue | | 4 | PWR_LED- (PLED-) | Power LED Negative | White | | 5 | PWR_SW (Power Button) | Power Switch Signal (Momentary) | Thin white/grey (sometimes yellow) | | 6 | PWR_SW# (Ground/Return) | Power Switch Ground | Black | | 7 | RESET_SW (Reset Button) | Reset Switch Signal (Momentary) | Blue or brown | | 8 | RESET_SW# (Ground/Return) | Reset Switch Ground | Black | | 9 | N/C or +5V Standby | Not connected on most models; sometimes standby power | N/A | | 10 | GND | Chassis Ground | Black | There isn't one